• George Elmslie/Scoville building design mold ready

    George Elmslie/Scoville building design

    The new mold for pressing terracotta from is finally dry, it took 2 weeks in front on a box fan on high. The main base piece weighs 90#, the other 6 sections probably adds another 50# to that.

    George Elmslie and Dankmar Adler’s¬† 1884 Chicagoan¬† James Scoville building¬† “Sullivanesque” design is sure to be stunning in kiln fired red terracotta. There are a few originals out there, at least one is sitting in a Virginia museum, and others as well as other designs from the same building have been spotted on already sold live-auction sites after having sold for an insane $5,000- $15,000, but when people have NO lower cost options and want a particular design then they have to pay through the nose, they also have to accept whatever condition and quantity is available.

    It would really suck if someone had a great design in mind for their project, but it takes 4 identical pieces and they can only find 2 at a salvage yard! That’s a common delemma whe dealing with antiques- you need 2 someone only has 1 for sale, or you find 2 but one is so damaged it’s almost unusable.

    That’s where I have an advantage, because if a client needs 4 of these or 44 of them, they could have them, and at a far more reasonable cost! At this time the interior-cast stone version of this panel is priced at $229, shipped to any of the lower 48 states;

    SIZE: Nominal 21-1/4″ high by 13″ wide, 3″ deep.

    WEIGHT: Nominal #35

    When these are pressed from terracotta, due to clay shrinkage, the fired terracotta version will be slightly smaller- approx 10-15%, so those will wind up around 19″ high and 11-1/2″ wide which will be a nice residential scaled sculpture that can be displayed indoors or outdoors, it can be embedded into a brick, concrete or stone wall.

    I expect the terracotta version will probably be priced around $329